PPM Polar Blast Cooling System
PPM Polar Blast Cooling System
PPM Polar Blast Cooling System
Descripción
The PPM Technologies Polar Blast cooling system is designed to reduce the temperature of your product prior to freezing, packaging or general handling.
By using the Polar Blast to remove the product’s sensible heat, you achieve more efficient rapid cooling, without affecting the product.
This innovative system decreases cooling time by up to 50% (depending on the product), by directing multiple high-velocity jets of air onto the product, disrupting the escaping heat layer surrounding it. The Polar Blast can reduce the product temperature down to 20 degrees above the ambient temperature.
A More Cost-Effective Approach
It’s common to use multiple Polar Blast systems to achieve the required product temperature, and even with several units this method is more cost-effective than installing a cooling tunnel or spiral cooler. A single Polar Blast system can replace up to 20 feet of a traditional cooling conveyor.
Product Safety
It is common to use multiple Polar Blast systems to achieve the required temperature; this method is still more cost effective than installing a cooling tunnel or spiral cooler. A single Polar Blast system can replace up to 20′ of a traditional cooling conveyor.
By using the Polar Blast to remove the product’s sensible heat, you achieve more efficient rapid cooling, without affecting the product.
This innovative system decreases cooling time by up to 50% (depending on the product), by directing multiple high-velocity jets of air onto the product, disrupting the escaping heat layer surrounding it. The Polar Blast can reduce the product temperature down to 20 degrees above the ambient temperature.
A More Cost-Effective Approach
It’s common to use multiple Polar Blast systems to achieve the required product temperature, and even with several units this method is more cost-effective than installing a cooling tunnel or spiral cooler. A single Polar Blast system can replace up to 20 feet of a traditional cooling conveyor.
Product Safety
It is common to use multiple Polar Blast systems to achieve the required temperature; this method is still more cost effective than installing a cooling tunnel or spiral cooler. A single Polar Blast system can replace up to 20′ of a traditional cooling conveyor.
PPM Polar Blast Cooling System
Performance Highlight
Length
Widths
Height
- External motor mount
- Smooth inner surfaces
- No tools required to remove accelerator plate
Length
- 28.25″
Widths
- 24″ to 60″
Height
- 20.75″
Product Group
More Products
PPM VF Premier Vibratory Conveyor
The PPM Technologies VF Premier (VFP) conveyor takes electromagnetic technology to new lengths, combining a traditional frame and leaf-spring design with the VF electromagnetic drive and controller, to allow for a larger stroke that suits heavier loads and higher speeds.
PPM Mini VF Electromagnetic Vibratory Motion Conveyor
The PPM Technologies Mini VF is a small yet powerful electromagnetic vibratory motion conveyor that boasts a variety of versatile mounting options, adjustable feed rates, an open and sanitary design, low maintenance costs, and a long and dependable life cycle.
Ofrecido por
PPM Technologies Inc.
PPM Technologies Holdings, LLC es un proveedor líder a nivel mundial en la industria de procesamiento de alimentos, que ofrece tecnologías personalizadas de transporte, sazonado y fritura.
