Español
Descripción del Producto
The Water Reclamation System recirculates process water from Vanmark’s abrasive peelers – reducing water usage up to 90%.
The skid-mounted system removes peel waste from process water, collecting it to be sold, and recirculates filtered water back into the peeler in a closed loop.
It can integrate with and support up to three machines, with each now operating on less than 1.5 GPM (5.7 l/min) of fresh water input.
The skid-mounted system removes peel waste from process water, collecting it to be sold, and recirculates filtered water back into the peeler in a closed loop.
It can integrate with and support up to three machines, with each now operating on less than 1.5 GPM (5.7 l/min) of fresh water input.
- Clean and recirculate peeler water in closed loop to reduce usage up to 90%
- Integrate with and support up to three Peeler/ Scrubber/Washer machines
- Skid-mounted for easy installation and start-up
- Flow managed through meters at each machine and progressive overflow design for self-balance
- Sanitary design allows for quick and thorough cleaning
Especificaciones del Producto
Main Filter Screen: 48” (1219 mm) diameter x 106 micron
Motor: 15 amps, 460 VAC, 3 phase
Weight: 2000 lbs. (900 kg)
Solids: Collects approximately 1.5% of total product flow rate
Features:
Motor: 15 amps, 460 VAC, 3 phase
Weight: 2000 lbs. (900 kg)
Solids: Collects approximately 1.5% of total product flow rate
Features:
- Spray bar conversion assemblies
- Secondary waste separating auger
- Automated flush and restart modes
- Fresh water flow meter
- NEMA 4X SS enclosure
- Integrated control panel
- Lift pump for peelers with drain port lower than 56” (1422 mm)
Ofrecido por
Noticias relacionadas con este producto
Productos ofrecidos por los mismos proveedores
Hydrocutter Skid
The Vanmark Hydrocutter Skid provides quality and durability in an easy-to-install, compact integrated system. Suitable for products such as potatoes, carrots, cucumbers and (hot) peppers.
Peeler-Scrubber-Washer 1820 line
Vanmark Peeler/Scrubber/Washer – 1820: Continuous Washing & Peeling in One Efficient, Flexible Machine for lower capacities
Water Reclamation System
The Water Reclamation System recirculates process water from Vanmark’s Peeler/Scrubber/Washers – reducing water usage up to 90%.
Waste Separating Auger
The Waste Separating Auger filters solid waste out of Peeler/Scrubber/Washer process water– reducing waste to the drain system and resulting water treatment costs.
