Gulfood Manufacturing 2017 is on again in Dubai from the 31st October
Heat and Control is showcasing all things coating and conveying at Gulfood Manufacturing
Gulfood Manufacturing 2017 is on again in Dubai from the 31st October and
Heat and Control will once again be there, showcasing all things Coating
and Conveying.
Heat and Control FastBack 260E G3 Cartridge System
Spray Dynamics ‘Slurry On Demand’ Continuous Mixing System
Spray Dynamics equipment on display at Gulfood Manufacturing 2017
HeatWave® fryer by Heat and Control via Augmented Reality.
To further enhance these actual equipment systems, you will be able to experience a working HeatWave® fryer by Heat and Control via Augmented Reality.
Try the Heat and Control AR app. You can try it at home as well! Download and print this page, put it on your desk, open the AR app and aim your phone at the printed page.
The Heat and Control app uses a drawing of the HeatWave Fryer that acts as a trigger point to view the animation. All you need to do is download the Heat and Control AR app and point your device at this image of the HeatWave Fryer and a 3D model of the fryer appears. You can see how the HeatWave Fryer cooks product from 360 degrees as you move around the image, allowing you to see all sides and angles of the fryer.
The Heat and Control AR app allows the user to open and close the fryer by tapping on the screen prompts, and be able to run product through the fryer. This will involve an animation of food product (nuts) moving along the conveyor belt and oil flowing in curtains over the product.
Heat and Control Heatwave Fryer
Heat and Control Sales Manager, Bobby Kane:
“Given the size and sophisticated nature of a lot of our equipment, like the HeatWave Fryer, it can be a logistical nightmare to have large pieces of equipment of tradeshow booths for our customers to see.”The HeatWave snack frying system efficiently fry nuts, pellets, Namkeen and other snacks using less oil than conventional fryers by a proven breakthrough design that cooks snacks using curtains of clean filtered oil instead of submersion.
“The Heat and Control AR app now allows customers to accurately view and see how equipment such as the HeatWave Fryer operates, simply by using their phone or any mobile device anywhere in the world.”
Product experts will be on hand at the tradeshow, where they will be able to show you the IN’s and OUT’s of our extensive product range, along with the new product handling equipment range.
TEST YOUR PRODUCT
If you want to test your product, then we can arrange this too in any one of our 9 technical facilities across the globe. Try a selection of the latest processing, seasoning, coating, product handling, and packaging and inspection technologies in one of our demonstration centres.WHAT ELSE WILL BE AT GULFOOD MANUFACTURING FROM HEAT AND CONTROL?
E-FLO Electroporation system
Heat and Control E-flow electroporation system
NEW control systems by Heat and Control
We will also launch a NEW control systems by Heat and Control. This control system is bigger, brighter and so much easier for the processor to use. The newly developed screen, with clearer and more specific icons will show you immediately if something needs your attention, or for example, product changeover is required.Source
Heat and Control