Model CC Slicer
Food processors rely on the Urschel Model CC (MCC) to produce precise, uniform slices, strips cuts, shreds, and granules at high production capabilities with excellent results.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Comitrol® Processor Models 3600 - 3675SL
Shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.
conti-cut hydro cutting system
TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
M VersaPro® Dicer
The M VersaPro® (MVP) Dicer provides the best in sanitary design and the ultimate in versatile cutting of proteins. The MVP offers 33% increased feeding capacity versus the standard M6 due to wider belts, optimized cutting, and increased horsepower.
Hydro-cutting lines
Tummers Food Processing Solutions is the biggest player in hydro cutting technology in Europe. An extensive range of typical Tummers Food Processing Solutions standard equipment is available, while layout and details are custom designed.
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
Quadra-Flow
QuadraFlow's many benefits range from results on French fries, wedges, and slices, to easy operation and user-friendliness.
Cutting blocks
Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.
Sprint 2® Dicers
Sprint 2® Potato Dicer - 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 6.5" (165.1 mm) in any dimension.
Sponsored Content
You May Also Like
Diversa Cut 2110 A Dicers
The DiversaCut 2110A® Dicer offers a turnkey approach to processors. Available in 3 different models: DiversaCut 2110A Standard Dicer, NEW DiversaCut 2110A with Conveyor Discharge, and DiversaCut 2110A (LPI) Large Product Input.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Flo-Cut® Sizer-Halver
Flo-Mech's Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
Flo-Cut® Model 360 Watergun Cutting Head
The Flo-Cut® Model 360 cutting head is designed for use in large volume watergun systems, or with the Urschel Model VSC Cutter. This unit can be integrated into watergun systems and offers fast, easy cutting head replacement for changing knives or sizes of cuts.
clear-cut® SWM 3
Florigo clear-cut® SWM 3 is an efficient water cutting system that is able to handle a variety of cutting styles for potatoes – all while eliminating product damage.
Affinity® CD-L Dicer
The new Affinity® CD-L Dicer produces uniform dices in the small to intermediate size range. The CD-L combines the utility of Urschel Models CD-A and L-A, plus working design elements from the Affinity Integra® Dicer.
