thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
Potato Cleaning, Grading and Retail Packaging line
Potato cleaning, grading and retail packaging line
ultra-clean® COMBO 3
Florigo ultra-clean® COMBO 3 is a 3-in-1 cleaning solution for de-soiling, de-stoning and washing root vegetables, including potatoes.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Drop Limit Box Tipper
The Drop limit box tipper is a box tipper where the drop is limited, which leads to less damage to the product. The tilting of the box is done in three steps: The cubic box is put into the machine, after which the crate is clamped against a cover plate.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Mobile washer PD 500
Allround Mobile washer PD 500 washing machine is designed for cleaning produce. After the produce falls into the water it floats to a rotating drum. While the produce floats, stones and dirt sink to a waste belt at the back of the machine.
Box Fillers
Allround box fillers are designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the fall height is reduced as much as possible.
ultra-clean® WT 3
Florigo ultra-clean® WT 3 removes clay shells, sand and soil from potatoes and other root vegetables without damaging them.
Heat Exchanger
All kind of stored agricultural products are sensitive for too high CO2 levels. Too high CO2 levels can affect the quality of the product. For example during storage of industrial potatoes, high CO2 levels can affect the frying quality.
Belt Dryer
The Rosenqvists Belt Dryer works on air with low temperature and high humidity that ensure even drying results of each strip. The Belt Dryer uses the counter-air-flow principle where the airflow covers the full width of the belts.
Spiral Freezer
These Spiral Freezer and Chillers may freeze/chill convenience foods, ready-to-eat meals, ready to cook meals, frozen snacks, chicken, fish, and poultry products, frozen bread, cakes, and pastry products.
Sponsored Content
vac-pro® 3
Florigo vac-pro® 3 is a continuous vacuum frying system that gives you options to produce a variety of fried products, including root vegetables and fruits, with relatively low fat content.
Inspection unit in belt
The Allround Belt inspection table is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
Fans
Fans are an integral part of the storage system, and therefore it is very important the proper type of fans are chosen for the right application. Furthermore, fans should be reliable and able to work under difficult
batch-pro® 12
FOODesign batch-pro® 12 batch fries a wide selection vegetable chips including potato, taro, banana and plantain.
THS/MS21 Metal Detector
Product demonstrations of the CEIA THS/MS21 multi-spectrum metal detector are now available from Heat and Control.
tna conti-pro® DAL 3
Florigo conti-pro® DAL 3 is a continuous dal frying system that features a product transport system that increases product quality while reducing product loss.
