intelli-flav® CLO 3
The tna intelli-flav® CLO 3 oil and flavour spray system enables the accurate application of oil and injected flavour – or just oil – requiring no mixing tanks and leaving minimal flavour residue.
Box Tipping/Hopper Systems
Flo-Mech offers a range of box or crate tipping and unloading systems along with buffer hoppers to suit your requirements.
Comitrol® Processor Model 2100
This machine is used for reducing into flakes or granulation for further processing.
H-Flow Conveyor®
The H-Flow Conveyor® guarantees less product breakage and loss of coating and flavouring, compared to vibratory transfer systems.
Industrial Potato washing line 600 series
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Finger Grader
Flo-Mech's Finger Grader is an industrial stainless steel machine for custom sorting potatoes and tubers. The machine is directly adjustable, which means that production can continue while adjusting the settings.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Wet hopper
The Allround Wet hopper, previously called Jacuzzi, is used as a pre-cleaning device. The product falls in the water, where the sticky soil makes it heavier.
Duo Telescopic Belt
The Allround duo telescopic belt is designed to facilitate the loading and unloading of products in storage facilities. The belts are usually placed behind a space finder or pick-up scooter
hyper-detect® 5
Protect your brand’s reputation with the tna hyper-detect® 5. This high-performance food metal detector system is uniquely designed to sit as close as possible to the multi-head weigher, significantly increasing bagging speed without compromising food safety.
quik-coat® MD 5
tna quik-coat® MD 5 is the ultimate mandrel dispensing unit that applies a variety of free flowing ingredients consistently onto the top of products passing underneath. The tna quik-coat® MD 5 is custom configured for width and ingredients.
Sponsored Content
FastBack® 260E G3
The new FastBack P2 400E horizontal motion conveyor is the sanitary solution for high-volume transfer and distribution.
Space Finder
The Allround Space Finder is designed in such a way that bulk stores are filled in the most effective manner. The Space Finder makes sure every inch of the storage facility is used.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Vibration Plate
Allround Vibration Plate is designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the product damage is reduced as much as possible and to fill a box completely from sides as well.
Filter System
The Allround Filter system is designed to take out loose skin and dirt. Filtration is the separation of solids from the product by means of a filter belt, which retains the solids and allows the liquid to pass through.
TOMRA 5A
The TOMRA 5A sorting machine brings more than 98% removal rate of foreign objects, quality inspection and peel quality control to the table.
