intelli-weigh® omega series
tna intelli-weigh® omega series of multi-head weighers was designed to provide a simple, yet efficient weighing process while running wet or dry applications.
auto-splice 3
The tna auto-splice 3 system is an innovative solution that automatically joins a new film to an expiring film roll with no interruption to packaging line.
Steam Peeling
Steam peeling is the most efficient method of removing skin from vegetables and fruit. Lines processing between 1,000 kg/hr–65,000 kg/hr can benefit from TOMRA’s produce steam peeling equipment, resulting in savings of raw material and energy.
conti-cut hydro cutting system
TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines
Potato Flake Lines
Potato flake lines are a Tummers Specialty. Destoning, washing, peeling, cutting, cooking, mashing, drying, flaking, milling and packaging, all effortlessly performed.
Screen Sizer
Wyma's Screen Sizer is a modular alternative to the Lift Roller Sizer that effectively sizes round produce in a continuous process. The Screen Sizer has a rotating screen with holes at a set size that separates produce into two sizes.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
batch-pro® 12
FOODesign batch-pro® 12 batch fries a wide selection vegetable chips including potato, taro, banana and plantain.
hydro-clear® OWB 3
Florigo hydro-clear® OWB 3 is a solution for stripping water from both the top and bottom of potato slices before frying.
quik-coat® MD 5
tna quik-coat® MD 5 is the ultimate mandrel dispensing unit that applies a variety of free flowing ingredients consistently onto the top of products passing underneath. The tna quik-coat® MD 5 is custom configured for width and ingredients.
Tank Destoner
Wyma's Tank Destoner provides gentle stone and clod separation from produce prior to washing and reinspection cycles. Produce, stones and debris enter the water-filled tank, where a water jet directs the movement of produce towards the outfeed.
Flo-Pump Transfer System
Flo Mech Pumping systems is designed to gently transfer product from A to B
Washing line Roller Dryer
Tummers Washing Line Roller Dryer ensures that after washing and destoning the moisture still present is removed from the potatoes or tubers without affecting the product characteristics.
Sponsored Content
conti-pro® PC 3
Designed especially for potato chips, the tna conti-proPC 3 is a high-performance continuous frying system.
TranSlicer® 2510 Cutter
The TranSlicer 2510 Cutter accepts compressible food products up to 8" (203 mm) in diameter, or firm products up to 6-3/4" (171 mm) in diameter — precutting may be necessary. Optional static hold-down assembly is available to maintain positive feeding assistance.
hydro-wash® SW 3
Florigo hydro-wash® SW 3 is a slice washing system that removes starch and collects full size potato slices in a single layer for even frying.
Flo-Filter® Stack
The action continues under the fryer hood as the slices move down inside the fryer. In most systems in Europe the oil is heated by an incinerator (such as the Flo-Therm™ heater).
Creep Feed Hopper
Wyma's Creep Feed Hopper receives, stores, and conveys dirty produce that has a high level of dirt and clods. Wyma's Creep Feed Hopper is a dry hopper. It receives wet or dry produce with a high level of dirt and clods, allows for fast unloading and changeover time without starving your line of produce, and provides produce buffering.
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
