Diversa Cut 2110 A Dicers
The DiversaCut 2110A® Dicer offers a turnkey approach to processors. Available in 3 different models: DiversaCut 2110A Standard Dicer, NEW DiversaCut 2110A with Conveyor Discharge, and DiversaCut 2110A (LPI) Large Product Input.
intelli-flav® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Quadra-Flow
QuadraFlow's many benefits range from results on French fries, wedges, and slices, to easy operation and user-friendliness.
Elevators
The Allround elevators are designed to overcome heights in production lines. The machine is designed to transport the products in a gentle but fast manner.
Eco Steam Peeler
The Eco Steam Peeler leads the food processing industry in the pursuit of the highest peeling performance and reduced waste to enable processors to achieve sustainability objectives in their food production.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
SensoLogic Family
The SensoLogic (SL) product family for chemometric spectroscopy is a comprehensive quantitative and qualitative solution that simplifies modeling and use of your applications with consistent workflow orientation and clear
Odyssey steam peeler
The Odyssey steam peeler incorporates TOMRA's control software, an enlarged steam peeling vessel, and a weigh hopper.
Fastlane
Heat and Control Fastlane infeed conveyors offer Easy, safe and cost-effective delivery of a singulated stream of potatoes to multiple slicers.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Intake & Storage Equipment
Flo-Mech offers a range of intake and storage systems from smaller capacities all the way up to large systems with multiple infeed and storage bins. They can tailor solutions to your needs.
Hermes Flavour Liquids and Solids system
Hermes is a piece of equipment designed for large-scale production due to its robustness and size allows to apply powdered liquids, flavors and salt simultaneously.
Sponsored Content
Drum Dryer
Tummers is world market leader in potato flake lines. In a flakes line, the Drum Dryer dries the potato mash. A thin, perfectly distributed layer of mash is deposited onto the heated cylinder which evaporates excess moisture and creates a sheet of dried potato.
RoastR
Rosenqvists RoastR traditionally cooks snack pellets and is expanded using frying oil or hot air as heat transfer media. With RoastR, heat is applied through salt - the next step in snack innovation.
ThermoDrive Series 8140
With the release of ThermoDrive Series 8140, food industry manufacturers can now purchase high-quality, hygienic lug-driven belts supported by Intralox’s expertise and guarantees.
Vibration Plate
Allround Vibration Plate is designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the product damage is reduced as much as possible and to fill a box completely from sides as well.
H-Flow Conveyor®
The H-Flow Conveyor® guarantees less product breakage and loss of coating and flavouring, compared to vibratory transfer systems.
Grader-Halver
A cost-effective solution designed to consistently grade potatoes according to size then halve any that are larger than the predetermined size.
