TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Fin Aligner
The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.
conti-cut hydro cutting system
TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines
Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Comitrol® Processor Model 2100
This machine is used for reducing into flakes or granulation for further processing.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
M VersaPro® Dicer
The M VersaPro® (MVP) Dicer provides the best in sanitary design and the ultimate in versatile cutting of proteins. The MVP offers 33% increased feeding capacity versus the standard M6 due to wider belts, optimized cutting, and increased horsepower.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.
Fastlane
Heat and Control Fastlane infeed conveyors offer Easy, safe and cost-effective delivery of a singulated stream of potatoes to multiple slicers.
Quadra-Flow
QuadraFlow's many benefits range from results on French fries, wedges, and slices, to easy operation and user-friendliness.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Model CC Slicer
Food processors rely on the Urschel Model CC (MCC) to produce precise, uniform slices, strips cuts, shreds, and granules at high production capabilities with excellent results.
Sponsored Content
You May Also Like
Model VSC Segment Cutter
The Model VSC produces a wide range of segments, slabs, or rectangular strips. Several different cutting set-ups are available including standard heads, Flo-Cut® Model 360 heads, and Velocicut® heads. Consult your local Urschel sales representative for the cutting head best-suited for our application.
Slicer Module
Flo-Mech complete module for slicing of product on stainless steel platforms with flumes, integrated equipment, steel work, decking, stairs, handrail kick strips.
Flo-Cut® Sizer-Halver
Flo-Mech's Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
SureSet 16P Cutting Head
The SureSet 16 Cutting Head is FAM's latest solution for high capacity slicing, such as in the production of potato chips
Tridis™ 240P
FAM Tridis™ 240P is a reliable dicer and French fry cutter which delivers top-quality products while running at the highest capacities.
