conti-cut hydro cutting system
TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Comitrol® Processor Models 3600 - 3675SL
Shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects.
Cutting blocks
Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.
clear-cut® SWM 3
Florigo clear-cut® SWM 3 is an efficient water cutting system that is able to handle a variety of cutting styles for potatoes – all while eliminating product damage.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Hydro-cutting lines
Tummers Food Processing Solutions is the biggest player in hydro cutting technology in Europe. An extensive range of typical Tummers Food Processing Solutions standard equipment is available, while layout and details are custom designed.
Micro Adjustable Shape Cuts SL14
The Urschel MicroAdjustable® Slicing Head (SL-14) offers maximum cutting action and expedient knife changeovers for your potato chips production line.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
M VersaPro® Dicer
The M VersaPro® (MVP) Dicer provides the best in sanitary design and the ultimate in versatile cutting of proteins. The MVP offers 33% increased feeding capacity versus the standard M6 due to wider belts, optimized cutting, and increased horsepower.
Comitrol® Processor 3640A
The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.
Sponsored Content
You May Also Like
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
Fin Aligner
The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.
Grader-Halver
A cost-effective solution designed to consistently grade potatoes according to size then halve any that are larger than the predetermined size.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.
Centris® 315
FAM Centris™ 315P slicer was specially developed for the potato chips/crisps industry. It is ideal for both smaller capacity batch-type lines and continuous lines.
Dorphy™
FAM Dorphy is a lower capacity dicer designed to uniformly dice, strip-cut and slice a wide variety of potatoes. It offers food processors precision cutting along with substantial savings in production time and product waste.
