FastBack 4.0 Horizontal Motion Conveyor
FastBack 4.0 is a circular to linear drive horizontal motion conveyor, a new solution in horizontal motion conveying. It is the culmination of more than 10 years development and multiple international patents.
batch-pro® 12
FOODesign batch-pro® 12 batch fries a wide selection vegetable chips including potato, taro, banana and plantain.
Belt Dryer
The Rosenqvists Belt Dryer works on air with low temperature and high humidity that ensure even drying results of each strip. The Belt Dryer uses the counter-air-flow principle where the airflow covers the full width of the belts.
Affinity® CD-L Dicer
The new Affinity® CD-L Dicer produces uniform dices in the small to intermediate size range. The CD-L combines the utility of Urschel Models CD-A and L-A, plus working design elements from the Affinity Integra® Dicer.
Flo-Therm® G4 SX Oil Heater
Flo-Mech Flo-Therm® G4 SX Oil Heater is a Direct Oil Heating Systems with Pollution Control
Lift Roller Sizer
Wyma's Lift Roller Sizer has fully stainless steel construction and features mechanically driven rollers that turn consistently for more accurate sizing.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Hedgehog Top Remover
The Wyma Hedgehog Top Remover removes carrot tops, loose dirt and leaves, etc from produce flow. Produce and debris are fed onto the upwardly rotating belt.
Accumulation Trays
Optimize product flow regulations and homogenize the flow rate, using accumulation hoppers as required.
clear-cut® SWM 3
Florigo clear-cut® SWM 3 is an efficient water cutting system that is able to handle a variety of cutting styles for potatoes – all while eliminating product damage.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Duo Telescopic Belt
The Allround duo telescopic belt is designed to facilitate the loading and unloading of products in storage facilities. The belts are usually placed behind a space finder or pick-up scooter
Slurry On Demand Continuous Mixer
The Slurry-on-Demand Continuous Mixer is a recipe-driven, tank-less, continuous mixer that automatically and accurately mixes seasonings and liquids into homogeneous, lump-free slurries in the desired quantity demanded downstream.
Sponsored Content
Pick Up scooter APS 250
The Allround Pick Up scooter APS 250 is designed to empty bulk storage facilities. The bulk stores are cleared by the Pick-Up scooter by scooping up the produce. There is one driver needed, who will be working in comfort.
Inspection unit in belt
The Allround Belt inspection table is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
Ishida IX-G2 X-Ray Inspection
The new Ishida IX-G2 X-ray inspection systems uses a unique dual energy process that compares absorption of x-rays on two levels, avoiding problems from overlapping products.
TranSlicer® 2510 Cutter
The TranSlicer 2510 Cutter accepts compressible food products up to 8" (203 mm) in diameter, or firm products up to 6-3/4" (171 mm) in diameter — precutting may be necessary. Optional static hold-down assembly is available to maintain positive feeding assistance.
Filter System
The Allround Filter system is designed to take out loose skin and dirt. Filtration is the separation of solids from the product by means of a filter belt, which retains the solids and allows the liquid to pass through.
Even-flow hopper
The Allround Even-flow hopper is used to dose the flow of product in a line. Mostly the Even-flow hopper is used in front of a Weighing machine or an optical sorter.
