Intake & Storage Equipment
Flo-Mech offers a range of intake and storage systems from smaller capacities all the way up to large systems with multiple infeed and storage bins. They can tailor solutions to your needs.
Medium Potato Line
Medium Potato line is a 25-ton line which has two receiving options. Produce may be received directly from a field harvest truck or via storage bins using an Electric Bin Tipper.
Belt Inspection Table
Wyma's Belt Inspection Table conveys produce for manual and visual inspection. If produce is very dirty, an optional web belt can allow dirt, debris and water to fall through so they are not carried further down the processing line.
Screen sizer
The Allround Screen sizer is designed to grade according to the square or hexagonal size. the machine has a vibrating rotatling rubber bed with openings. is the product smaller than the opening, it falls on a belt.
Water Treatment (Solids Removal)
Solids handling system designed to work in conjunction with washing or other solid saturated water systems. This system can be sized and implemented to produce clean recirculated water where solids removal is required.
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Industrial Potato washing line 600 series
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
conti-pro® PC 3
Designed especially for potato chips, the tna conti-proPC 3 is a high-performance continuous frying system.
Even Flow Bins
Southern Fabrication Works offers a range of even flow bins with a wide range of capacities an with multiple filling and discharge options, designed to create a smooth and consistent product flow
TOMRA 3A
Boasting the highest capacity on the market, the TOMRA 3A is the most robust, reliable and cost-effective optical sorter available for growers.
Sponsored Content
Food Pump
The Pomac CP-AGF program comprises a range of stainless steel pumps, suited for pumping potatoes, vegetables and fruits, without damaging them.
intelli-spin® 700 series
The Arcall intelli-spin® 700 series uses advanced spinning disc technology to provide accurate and consistent liquid and slurry application.
accura-dry® BD 3
Ferguson accura-dry® BD 3 is a drying solution, removing moisture from French fries before frying.
Floating Debris Remover
Wyma's Floating Debris Remover removes unwanted buoyant debris from the Wyma Wet Hopper.
Sensors
Optimal storage conditions can only be achieved with the help of accurate sensors. Allround produces its temperature sensors in their own factory where they are produced under optimal conditions
Autotrax
A patented system for an optimum drying process that turns mash into potato flakes. The Tummers Autotrax makes sure that excess mash on the application rollers of the dryer is scraped off efficiently.
