E-FLO™ Electroporation System
E-FLO is an Electroporation system that uses pulse electric fields (PEF) technology. The system sends PEF through the cell walls of potatoes and root vegetables and perforates the cell membranes with microscopic holes.
Belt Dryer
The Rosenqvists Belt Dryer works on air with low temperature and high humidity that ensure even drying results of each strip. The Belt Dryer uses the counter-air-flow principle where the airflow covers the full width of the belts.
STRATA Invicta®
The STRATA Invicta® sets the new standard in steam peeling systems, offering the highest yield at the shortest possible cycle times.
Potato Processing Line 450 series
Potato Processing line with a washing area, polisher, shake grader. The washing area contains a Destoner when there is a lot of dirt coming along with the produce, destoners are the ideal machines.
PEF Advantage B 1000-850 system
The PEF Advantage B 1000-850 was developed for production runs of up to 100 t/h. With a higher throughput and more capacity, the machine comes in a more compact design, and includes all the usual safety features.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Fans
Fans are an integral part of the storage system, and therefore it is very important the proper type of fans are chosen for the right application. Furthermore, fans should be reliable and able to work under difficult
ultra-clean® OC 3
Florigo ultra-clean® OC 3 conducts separation of stones from root vegetables, including potatoes through a cyclone effect.
ropac® 5
The world’s fastest case-packing system for flexible bags capable of packing up to 220 bags per minute.
Storage hopper box tipper combinations
The storage hopper with box tipper is designed to act as a buffer with tipping possibility. A box with produce is placed into the tipper. The box tips and the products fall down into the storage hopper.
intelli-detect® 3
Protect your product from contamination with the tna intelli-detect® 3 – a highly accurate throat metal detector specially designed to detect contaminants of less than 0.5mm in diameter, in addition to any metals.
FastBack® 260E G3
The new FastBack P2 400E horizontal motion conveyor is the sanitary solution for high-volume transfer and distribution.
Sponsored Content
intelli-flav® OMS 5.1
The tna intelli-flav® OMS 5.1 is a next-generation on-machine seasoning (OMS) system that provides both powder flavouring and liquid oil in a single drum, to deliver consistent coverage and flavour to a variety of products.
Peeling line Delta Roller Spreader
The Tummers Peeling Line Delta Roller Spreader has specially been developed for gentle transport to a wider product flow. This machine is commonly used to feed potatoes from the outfeed of a screw conveyor to a wide sorter, but is suitable for a wide variety of food products.
E²E-Condenser
Steam peeling is the most efficient way to peel potatoes, but the emission causes a loss of energy. The E²E-Condenser saves energy by condensing the emission and using the water for other purposes that take place further in the process.
Rinsing / Starch Washing Systems
Flo-Mech Rinsing / Washing systems design for removing surface starch. Flo-Mech offer a range of solutions to remove surface starch from peeled / cut potatoes before the next stag of the process.
accura-dry® BD 3
Ferguson accura-dry® BD 3 is a drying solution, removing moisture from French fries before frying.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
