Creep Feed Hopper
Wyma's Creep Feed Hopper receives, stores, and conveys dirty produce that has a high level of dirt and clods. Wyma's Creep Feed Hopper is a dry hopper. It receives wet or dry produce with a high level of dirt and clods, allows for fast unloading and changeover time without starving your line of produce, and provides produce buffering.
Drop Limit Box Tipper
The Drop limit box tipper is a box tipper where the drop is limited, which leads to less damage to the product. The tilting of the box is done in three steps: The cubic box is put into the machine, after which the crate is clamped against a cover plate.
Fin Aligner
The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.
Flo-Therm® G4 PC Oil Heater
Flo-Mech Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
Tank Destoner
Wyma's Tank Destoner provides gentle stone and clod separation from produce prior to washing and reinspection cycles. Produce, stones and debris enter the water-filled tank, where a water jet directs the movement of produce towards the outfeed.
Flo-Pump Transfer System
Flo Mech Pumping systems is designed to gently transfer product from A to B
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Floating Debris Remover
Wyma's Floating Debris Remover is designed to sit above the tank of a Wet Hopper and prevent floating debris from clogging downstream equipment.
Potato Cheese Shots
The magic of finely blended potatoes, exotic herbs and cheese wrapped in crispy, golden coating of breadcrumbs, is bound to get a huge fan following. The explosion of warm, molten cheese in every bite is worth getting addicted to.
Food Pump
The Pomac CP-AGF program comprises a range of stainless steel pumps, suited for pumping potatoes, vegetables and fruits, without damaging them.
FLO-STARCH® Starch and Water Recovery System
FLO-STARCH® Starch and Water Recovery System separates starch from process water and deposits the starch in large bags for re-sale or re-use.
Hydro-Cooler for loose produce
Wyma Hydro-Coolers quickly reduce the core temperature of fresh produce, extending shelf life while preserving flavor and appearance. Water is sprayed over a heat exchanger which is cooled to several degrees below freezing by refrigerant.
ultra-peel® SKC 3
Florigo ultra-peel® SKC 3 is an abrasive peeler that operates in batches, weighing your product, to ensure optimized peeling results from small, medium and large potatoes for the production of potato chips.
Sponsored Content
Elevator
Flo-Mech feed elevator is manufactured from RHS stainless steel. Blue modular flighted belt with an integrated C.I.P system to clean belt and sprockets.
Cold Storage Solution
NSSPL cold storages are designed with the latest technologies keeping local climatic conditions into consideration. NSSPL builds Temperature Controlled Cold Storage
Screw Compressor Packages
NSSPL is an authorized indigenous GEA Screw Compressor package manufacturer, supplier, and installer.
Belt Dryer
The Rosenqvists Belt Dryer works on air with low temperature and high humidity that ensure even drying results of each strip. The Belt Dryer uses the counter-air-flow principle where the airflow covers the full width of the belts.
Frozen French Fries Plant
Manufacturing the French fries and the frozen French fry do not have much difference. It differs only in the final part of frying and freezing. The frozen French fries take lesser time to fry than the fresh French fries.
French Fries Line
Tummers Food Processing Solutions has built up extensive knowledge of potatoes as a raw material and the best methods for processing them.
