Box Unstacker
Allround box unstacker is designed to speed up the process of unstacking and can be easily added to existing lines. This process provides a logistic advantage by reducing forklift movements.
Box Transport Trolley
Allround box transport trolleys are designed to speed up the process of box transport and can be easily added to existing lines. This process provides a logistic advantage by reducing forklift movements.
Shake Grading line SG80 series
The Allround Shake grader is designed to grade potatoes according to their square size. The potatoes are fed to the top of the machine onto the top sieve. The sieves in the machine shake in sequential frequencies, which causes the potatoes to move along on the sieves.
Heracles Flavour Liquids and Solids system
Heracles is a robust and high capacity equipment, designed for high productions or for products that are difficult to aromatize.
intelli-flav® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
InProcess Software
InProcess makes the most of your production by allowing you to monitor, adjust and gain valuable data from your ZEISS spectrometers. Icon based and intuitive, InProcess is also fully customizable.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
E²E-Condenser
Steam peeling is the most efficient way to peel potatoes, but the emission causes a loss of energy. The E²E-Condenser saves energy by condensing the emission and using the water for other purposes that take place further in the process.
Fryer for Batter-coated French Fries
Over 16,000 kg/h of finished crispy batter-coated french fries can be produced for fast-food lovers using Heat and Control's latest batter applicator and multi-zone fryer system.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Straight Cut 9x9mm French Fries
These boast real potato flavour, wholesome bite and are extra long and chunky, guaranteeing umpteen customer satisfaction. Moreover, with irresistible flavour, these fries also offer greater plate coverage bringing.
Flo-Flavour®
Flo-Flavour™ systems are designed to mix together powder flavourings and oil whilst keeping the mix at the correct temperature and the components in suspension before delivery to the flavour application drum via a nozzle lance.
Affinity® CD-L Dicer
The new Affinity® CD-L Dicer produces uniform dices in the small to intermediate size range. The CD-L combines the utility of Urschel Models CD-A and L-A, plus working design elements from the Affinity Integra® Dicer.
Sponsored Content
CCW-RV Open Frame Weigher
Ishida’s latest IP69K waterproof weigher is now fully open for cleaning.
Fresh produce pump
Tummers Food Processing Solutions has exclusive marketing rights to product pumps for processing potatoes, vegetables, and fruit. Their fresh produce pumps will pump your product without damaging it.
robag® 3e
The new tna robag® 3e is the latest iteration of the industry-leading tna robag® packaging series. The new tna robag® 3e takes control sophistication to an unprecedented level with real-time communication software and smart diagnostics.
intelli-flav® CLO 3
The tna intelli-flav® CLO 3 oil and flavour spray system enables the accurate application of oil and injected flavour – or just oil – requiring no mixing tanks and leaving minimal flavour residue.
tna conti-pro® DAL 3
Florigo conti-pro® DAL 3 is a continuous dal frying system that features a product transport system that increases product quality while reducing product loss.
Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
