intelli-spin® 100 series
Arcall intelli-spin® 100 series is a cantilever spray system that uses spinning disc technology to provide accurate and consistent liquid and slurry application.
Activated Roller Belt
Activated Roller Belt™ (ARB™) technology is a patented, automated conveyance solution that creates new possibilities for system or line layouts. Proven in thousands of installations worldwide, ARB equipment enables efficient, gentle
intelli-weigh® alpha advance series
The tna intelli-weigh® alpha advance series of multi-head weighers is a simple, affordable weighing solution that does not compromise performance or efficiency.
hydro-clear® OWB 3
Florigo hydro-clear® OWB 3 is a solution for stripping water from both the top and bottom of potato slices before frying.
intelli-detect® 3
Protect your product from contamination with the tna intelli-detect® 3 – a highly accurate throat metal detector specially designed to detect contaminants of less than 0.5mm in diameter, in addition to any metals.
Everlast Fries - The Coated Solution
Truthful to its name, these fries have exceptionally extended holding time that ensures long-lasting crispiness, while locking in great potato flavour.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
ThermoDrive Series 8140
With the release of ThermoDrive Series 8140, food industry manufacturers can now purchase high-quality, hygienic lug-driven belts supported by Intralox’s expertise and guarantees.
Aspire storage system
The aspire system for open boxes is also a direct ventilation system. The air in the room is conditioned and then sucked through the boxes. All kinds of standard open boxes can be used for this system.
Chilly Garlic Potato Shots
The goodness of potatoes seasoned with the perfect dash of spice and garlic. This sinfully flavoursome filling is enveloped in golden, crunchy layer to bring you the very zesty and delicious Chilly Garlic Potato Shots! A total earner of 'Repeat Please!'
Floating Debris Remover
Wyma's Floating Debris Remover is designed to sit above the tank of a Wet Hopper and prevent floating debris from clogging downstream equipment.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Cyclone Destoner
Wyma's Cyclone Destoner gently separates stones from produce. Produce and stones are fed into a moving well of water in the Cyclone Destoner cone.
Sponsored Content
roflo® HM 3
The tna roflo® HM 3 is a high-performance food conveyor system that handles products gently, yet efficiently, using a slow, forward horizontal motion, followed by a fast return horizontal motion.
Palletizer
The VPM – 5 ECO Palletizer makes automatic palletizing accessible for every company by combining the experience from Verbruggen Palletizing Solutions with the production experience of Allround India.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Flo-Therm® G4 PC Oil Heater
Flo-Mech Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
Flo-Cut® Model 360 Watergun Cutting Head
The Flo-Cut® Model 360 cutting head is designed for use in large volume watergun systems, or with the Urschel Model VSC Cutter. This unit can be integrated into watergun systems and offers fast, easy cutting head replacement for changing knives or sizes of cuts.
