Mega-Tip Rotary Bin Tipper
Wyma's Mega-tip Rotary Box Tipper was custom designed for gentle tipping of very large boxs. It can tip boxes weighing up to 4.5t and measuring 3700mm wide (approx.).
Zephyr Horizontal Motion Conveyor
Zephyr™ provides gentle, high-capacity and low maintenance conveying for processors of frozen, fragile, seasoned, breaded or coated products.
Potato washing, brushing and grading line
Potato Processing line with a washing area, brushing area, and grading area.
Multi-Zone Chips Frying System
Rosenqvists Food Technologies have designed the Multi-Zone Chips Fryer to give the final product the desired characteristics, for optimal control of the frying process.
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
intelli-detect® 3
Protect your product from contamination with the tna intelli-detect® 3 – a highly accurate throat metal detector specially designed to detect contaminants of less than 0.5mm in diameter, in addition to any metals.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
quik-coat® MD 5
tna quik-coat® MD 5 is the ultimate mandrel dispensing unit that applies a variety of free flowing ingredients consistently onto the top of products passing underneath. The tna quik-coat® MD 5 is custom configured for width and ingredients.
Cutting blocks
Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.
Inspection unit in belt
The Allround Belt inspection table is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
THS/MS21 Metal Detector
Product demonstrations of the CEIA THS/MS21 multi-spectrum metal detector are now available from Heat and Control.
Membrana
PEF specialist Pulsemaster offers a conductivity measurement device to both the food and beverage industry, as well as the scientific sector. This unit is instrumental in the quantification of a pulsed electric field treatment on e.g. potato tissue.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Small line to pack potatoes
In this example of a small line to pack potatoes (5 ton per hour), produce can be received onto an Elevator where they are fed into a Horizontal Debris Remover, to remove loose dirt, vine, and other debris.
Comitrol® Processor Models 3600 - 3675SL
Shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects.
FastBack® Left Right Center (LRC) Diverting Weigher Infeed Solution
The FastBack Left Right Center (LRC) is a compact double multihead weigher feed solution designed to provide a precise, consistent product stream to Ishida's patented back-to-back 218 twin weigher.
Continuous Peeler
Flo-Mech's continuous abrasive potato peeler machine can process up to approximately 6 tonnes of potatoes per hour. Each roller in the potato peeling machine is driven separately.
Troughed Conveyors & Elevators
Wyma's Troughed Conveyor & Elevator range is suitable for very dirty produce or situations where many stones are mixed with the produce. This range can also be used for high-load applications.
Octal-R Conveyors & Elevators
Wyma's Octal-R Conveyors & Elevators transport produce efficiently to different parts of your line. Produce is fed on to the conveyor or elevator and is transported in the direction of belt motion.