TranSlicer® 2510 Cutter
The TranSlicer 2510 Cutter accepts compressible food products up to 8" (203 mm) in diameter, or firm products up to 6-3/4" (171 mm) in diameter — precutting may be necessary. Optional static hold-down assembly is available to maintain positive feeding assistance.
Station Inspection Table
Flo-Mech's rollers or belt inspection tables are built to last with cutting tables and knives with many options available
Vege-Polisher™ V4
Our V4 Vege-Polisher™ has many features including automated machine operation and improved access for maintenance and cleaning. Our Vege-Polisher™ has a rotating drum made up of rows of nylon brushes. Produce enters via a large infeed chute.
Filter System
The Allround Filter system is designed to take out loose skin and dirt. Filtration is the separation of solids from the product by means of a filter belt, which retains the solids and allows the liquid to pass through.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Fin Aligner
The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Sensors
Optimal storage conditions can only be achieved with the help of accurate sensors. Allround produces its temperature sensors in their own factory where they are produced under optimal conditions
Roller Inspection Table
Wyma's Roller Inspection Table conveys produce for manual and visual inspection. Rollers run on a heavy-duty chain around a bed with rubber strips on the top edge.
Flume Destoner
Wyma's Flume Destoner removes stones and clods from your produce flow to minimize damage to equipment and produce further down your processing line.
Evenflow
Wyma's Evenflow Hopper is a combination conveyor and hopper. It evenly supplies produce to the next piece of equipment in your line (in a continuous process). It converts an irregular infeed supply to a constant outfeed flow.
Multi-zone continuous Fryers
The Heat and Control Multi-Zone Potato Chip Fryers deliver the ultimate in processing flexibility. Used to produce most of the world’s potato chips, these fryers deliver superior product quality, clean operation and total reliability
Creep Feed Hopper
Wyma's Creep Feed Hopper receives, stores, and conveys dirty produce that has a high level of dirt and clods. Wyma's Creep Feed Hopper is a dry hopper. It receives wet or dry produce with a high level of dirt and clods, allows for fast unloading and changeover time without starving your line of produce, and provides produce buffering.
Sponsored Content
11 mm Skin on French Fries
With the skin left on for extra flavour and rustic appeal, these frites are made from uber long, high quality potatoes. Potato skin is not only a rich source of fibre
intelli-spin® 100 series
Arcall intelli-spin® 100 series is a cantilever spray system that uses spinning disc technology to provide accurate and consistent liquid and slurry application.
Shake grading line SG120 series
SG 120 is designed for companies that are grading potatoes and onions up to 20-25 tons/hour. The line is especially suitable for seed potatoes.
Washing line Roller Dryer
Tummers Washing Line Roller Dryer ensures that after washing and destoning the moisture still present is removed from the potatoes or tubers without affecting the product characteristics.
Temperature Controlled Cold Storage
NSSPL offers turnkey solutions for all types of cold storages including civil and PEB works, based on customer requirements of cold storage, by creating and defining the industry through its in-house innovated and also world over available technologies.
Polisher
Allround polishers are designed to polish produce. The TD (turning drum) machine consists of a rotating drum with counter-rotating brushes.
