thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
Cutting line Switcher
Tummers Cutting line Switcher is a stainless steel, industrial switcher for changing cutting blocks either automatically or manually, and without interrupting your production. They can be Operated with a front-mounted touch screen.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
Defatter
Rosenqvists patented Defatter has been proven to add value to many fried snack products by reducing the fat content by as much as 35% over typical levels.
Multi Turbulent Blancher
Rosenqvists counter flow Multi Turbulent Blancher is used in the potato chip process to reduce the sugar content of the potato strips. The frying process reveals the amount of sugar by darkening the color.
Pick Up scooter APS 250
The Allround Pick Up scooter APS 250 is designed to empty bulk storage facilities. The bulk stores are cleared by the Pick-Up scooter by scooping up the produce. There is one driver needed, who will be working in comfort.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Slice Washer System
Rosenqvists Slice Washer System, a patented three-step washing system for optimal water use. When the potatoes are sliced, free surface starch is released and needs to be washed off.
Intake & Storage Equipment
Flo-Mech offers a range of intake and storage systems from smaller capacities all the way up to large systems with multiple infeed and storage bins. They can tailor solutions to your needs.
auto-splice 3
The tna auto-splice 3 system is an innovative solution that automatically joins a new film to an expiring film roll with no interruption to packaging line.
Model CC Slicer
Food processors rely on the Urschel Model CC (MCC) to produce precise, uniform slices, strips cuts, shreds, and granules at high production capabilities with excellent results.
Belt Dryer
The Rosenqvists Belt Dryer works on air with low temperature and high humidity that ensure even drying results of each strip. The Belt Dryer uses the counter-air-flow principle where the airflow covers the full width of the belts.
Extrusion Grade Potato Flakes
Iscon Balaji Foods is a renowned manufacturer and supplier of dehydrated potato flakes that have been through an industrial process of cooking, mashing and dehydrating to yield a packaged convenience food that can be reconstituted by adding hot water or milk for mashed potatoes.
Sponsored Content
Inspection unit in belt
The Allround Belt inspection table is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
Allstore
Allstore is regulating the temperature, relative humidity, and CO₂ level inside the storage building to the optimal values to maintain the product quality with minimal storage losses.
Inspection Module
Flo-Mech Inspection Module is a product on stainless steel platforms with optional waste conveyors or flumes, integrated equipment, steelwork, decking, stairs, handrail & kick strips.
Peeling line
Tummers peeling lines for the peeling and after-washing of potatoes and tubers are developed with the purpose of high-quality end product and minimal skin loss.
Dry Peel Remover ZZ/ZicZac Brusher
Tummers Dry Peel Remover ZZ/ZicZac Brusher innovative stainless steel peel remover conveys potatoes and tubers after they have been steam-peeled, vertically between roller brushes in a zigzag arrangement to remove their peel and brush them.
intelli-detect® 3
Protect your product from contamination with the tna intelli-detect® 3 – a highly accurate throat metal detector specially designed to detect contaminants of less than 0.5mm in diameter, in addition to any metals.
