Wet hopper
The Allround Wet hopper, previously called Jacuzzi, is used as a pre-cleaning device. The product falls in the water, where the sticky soil makes it heavier.
intelli-spin® 100 series
Arcall intelli-spin® 100 series is a cantilever spray system that uses spinning disc technology to provide accurate and consistent liquid and slurry application.
conti-pro® PC 3
Designed especially for potato chips, the tna conti-proPC 3 is a high-performance continuous frying system.
Inspection unit in cabin
The Allround Cabin inspection is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
Inspection unit in belt
The Allround Belt inspection table is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
Comitrol® Processor 3640A
The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Accumulation Trays
Optimize product flow regulations and homogenize the flow rate, using accumulation hoppers as required.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
Big-bag Filler
The Allround Big-bag filler is designed to fill big bags continuously in the most gentle way possible. This is achieved by a fall damping system which automatically goes up as soon as the level of product in the big bag requires.
Gooseneck Box Filler
Wyma's Gooseneck Bin Filler gently fills bins with produce. The gooseneck outfeed means the distance between the end of the elevator and the bottom of the bin is minimal to avoid produce damage.
Web Conveyors & Elevators
Wyma Web Conveyor & Elevator belts are made with rubber-coated steel bars. Gaps between the bars allow debris or water to fall through the belt, separating it from produce flow.
Drum Dryer
Tummers is world market leader in potato flake lines. In a flakes line, the Drum Dryer dries the potato mash. A thin, perfectly distributed layer of mash is deposited onto the heated cylinder which evaporates excess moisture and creates a sheet of dried potato.
Sponsored Content
Autotrax
A patented system for an optimum drying process that turns mash into potato flakes. The Tummers Autotrax makes sure that excess mash on the application rollers of the dryer is scraped off efficiently.
Grader-Halver
A cost-effective solution designed to consistently grade potatoes according to size then halve any that are larger than the predetermined size.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Drying Tunnel
Wyma's Drying Tunnel removes excess surface moisture from produce prior to packaging to reduce the risk of bacterial growth and disease initiation, maximizing shelf life.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Herb Potato Patty
These are the nuclei component of the famous fast food, Burgers. They, at IBF just don’t leave it to the salads and sauce combinations to do the taste bud tickling in a burger.
